-
João Magalhães authoredJoão Magalhães authored
mmu.rs 21.30 KiB
//! MMU (Memory Management Unit) functions and structures.
use std::sync::Mutex;
use crate::{
apu::Apu,
assert_pedantic_gb,
dma::Dma,
gb::{Components, GameBoyConfig, GameBoyMode, GameBoySpeed},
pad::Pad,
panic_gb,
ppu::Ppu,
rom::Cartridge,
serial::Serial,
timer::Timer,
util::SharedThread,
warnln,
};
pub const BOOT_SIZE_DMG: usize = 256;
pub const BOOT_SIZE_CGB: usize = 2304;
pub const RAM_SIZE_DMG: usize = 8192;
pub const RAM_SIZE_CGB: usize = 32768;
pub trait BusComponent {
fn read(&self, addr: u16) -> u8;
fn write(&mut self, addr: u16, value: u8);
fn read_many(&self, addr: u16, count: usize) -> Vec<u8> {
(0..count)
.map(|offset| self.read(addr + offset as u16))
.collect()
}
fn write_many(&mut self, addr: u16, values: &[u8]) {
for (offset, &value) in values.iter().enumerate() {
self.write(addr + offset as u16, value);
}
}
}
pub struct Mmu {
/// Register that controls the interrupts that are considered
/// to be enabled and should be triggered.
pub ie: u8,
/// Register that controls the compatibility mode in use, this
/// value comes directly from 0x0143 (CGB flag). The possible (and
/// valid) values are: 0x80 for games that support CGB enhancements
/// and 0xC0 for games that are compatible only with a CGB device
/// (CGB only).
pub key0: u8,
/// Flags that controls if the system is currently in the process
/// of switching between the double and single speed modes.
pub switching: bool,
/// The speed (frequency) at which the system is currently running,
/// it may be either normal (4.194304 MHz) or double (8.388608 MHz).
speed: GameBoySpeed,
/// Callback to be called when the speed of the system changes, it
/// should provide visibility over the current speed of the system.
speed_callback: fn(speed: GameBoySpeed),
/// Reference to the PPU (Pixel Processing Unit) that is going
/// to be used both for VRAM reading/writing and to forward
/// some of the access operations.
ppu: Ppu,
/// Reference to the APU (Audio Processing Unit) that is going /// to be used both for register reading/writing and to forward
/// some of the access operations.
apu: Apu,
/// Reference to the DMA (Direct Memory Access) controller that is going
/// to be used for quick and CPU offloaded memory transfers.
/// There are multiple execution modes for the DMA.
dma: Dma,
/// Reference to the Gamepad structure that is going to control
/// the I/O access to this device.
pad: Pad,
/// The timer controller to be used as part of the I/O access
/// that is memory mapped.
timer: Timer,
/// The serial data transfer controller to be used to control the
/// link cable connection, this component is memory mapped.
serial: Serial,
/// The cartridge ROM that is currently loaded into the system,
/// going to be used to access ROM and external RAM banks.
rom: Cartridge,
/// Flag that control the access to the boot section in the
/// 0x0000-0x00FE memory area, this flag should be unset after
/// the boot sequence has been finished.
boot_active: bool,
/// Buffer to be used to store the boot ROM, this is the code
/// that is going to be executed at the beginning of the Game
/// Boy execution. The buffer effectively used is of 256 bytes
/// for the "normal" Game Boy (MGB) and 2308 bytes for the
/// Game Boy Color (CGB). Note that in the case of the CGB
/// the BIOS which is 2308 bytes long is in fact only 2048 bytes
/// as the 256 bytes in range 0x0100-0x01FF are meant to be
/// overwritten byte the cartridge header.
boot: Vec<u8>,
/// Buffer that is used to store the RAM of the system, this
/// value varies between DMG and CGB emulation, being 8KB for
/// the DMG and 32KB for the CGB. Mapped in range 0xC000-0xDFFF.
ram: Vec<u8>,
/// The RAM bank to be used in the read and write operation of
/// the 0xD000-0xDFFF memory range (CGB only).
ram_bank: u8,
/// The offset to be used in the read and write operation of
/// the RAM, this value should be consistent with the RAM bank
/// that is currently selected (CGB only).
ram_offset: u16,
/// The current running mode of the emulator, this
/// may affect many aspects of the emulation.
mode: GameBoyMode,
/// The pointer to the parent configuration of the running
/// Game Boy emulator, that can be used to control the behaviour
/// of Game Boy emulation.
gbc: SharedThread<GameBoyConfig>,
}
impl Mmu {
pub fn new(
components: Components,
mode: GameBoyMode,
gbc: SharedThread<GameBoyConfig>,
) -> Self { Self {
ppu: components.ppu,
apu: components.apu,
dma: components.dma,
pad: components.pad,
timer: components.timer,
serial: components.serial,
rom: Cartridge::new(),
boot_active: true,
boot: vec![],
ram: vec![],
ram_bank: 0x1,
ram_offset: 0x1000,
ie: 0x0,
key0: 0x0,
speed: GameBoySpeed::Normal,
switching: false,
speed_callback: |_| {},
mode,
gbc,
}
}
pub fn reset(&mut self) {
self.rom = Cartridge::new();
self.boot_active = true;
self.boot = vec![];
self.ram = vec![];
self.ram_bank = 0x1;
self.ram_offset = 0x1000;
self.ie = 0x0;
self.key0 = 0x0;
self.speed = GameBoySpeed::Normal;
self.switching = false;
}
pub fn allocate_default(&mut self) {
self.allocate_dmg();
}
pub fn allocate_dmg(&mut self) {
self.boot = vec![0x00; BOOT_SIZE_DMG];
self.ram = vec![0x00; RAM_SIZE_DMG];
}
pub fn allocate_cgb(&mut self) {
self.boot = vec![0x00; BOOT_SIZE_CGB];
self.ram = vec![0x00; RAM_SIZE_CGB];
}
/// Notifies the system that a VBlank interrupt has been
/// triggered, would usually be the perfect time to update
/// some of the internal memory structures.
pub fn vblank(&mut self) {
let writes = self.rom.vblank();
if let Some(writes) = writes {
for (base_addr, addr, value) in writes {
match base_addr {
0xa000 => self.rom.ram_data_mut()[addr as usize] = value,
0xc000 => self.ram[addr as usize] = value,
_ => panic_gb!("Invalid base address for write: 0x{:04x}", base_addr),
}
}
}
}
/// Switches the current system's speed toggling between
/// the normal and double speed modes.
pub fn switch_speed(&mut self) {
self.speed = self.speed.switch(); self.switching = false;
(self.speed_callback)(self.speed);
}
pub fn speed(&self) -> GameBoySpeed {
self.speed
}
pub fn set_speed(&mut self, value: GameBoySpeed) {
self.speed = value;
}
pub fn set_speed_callback(&mut self, callback: fn(speed: GameBoySpeed)) {
self.speed_callback = callback;
}
pub fn ppu(&mut self) -> &mut Ppu {
&mut self.ppu
}
pub fn ppu_i(&self) -> &Ppu {
&self.ppu
}
pub fn apu(&mut self) -> &mut Apu {
&mut self.apu
}
pub fn apu_i(&self) -> &Apu {
&self.apu
}
pub fn dma(&mut self) -> &mut Dma {
&mut self.dma
}
pub fn dma_i(&self) -> &Dma {
&self.dma
}
pub fn pad(&mut self) -> &mut Pad {
&mut self.pad
}
pub fn pad_i(&self) -> &Pad {
&self.pad
}
pub fn timer(&mut self) -> &mut Timer {
&mut self.timer
}
pub fn timer_i(&self) -> &Timer {
&self.timer
}
pub fn serial(&mut self) -> &mut Serial {
&mut self.serial
}
pub fn serial_i(&self) -> &Serial {
&self.serial
}
pub fn boot_active(&self) -> bool {
self.boot_active
}
pub fn set_boot_active(&mut self, value: bool) {
self.boot_active = value; }
pub fn clock_dma(&mut self, cycles: u16) {
if !self.dma.active() {
return;
}
if self.dma.active_dma() {
let cycles_dma = self.dma.cycles_dma().saturating_sub(cycles);
if cycles_dma == 0x0 {
let data = self.read_many((self.dma.value_dma() as u16) << 8, 160);
self.write_many(0xfe00, &data);
self.dma.set_active_dma(false);
}
self.dma.set_cycles_dma(cycles_dma);
}
// @TODO: Implement DMA transfer in a better way, meaning that
// the DMA transfer should respect the timings
//
// In both Normal Speed and Double Speed Mode it takes about 8 μs
// to transfer a block of $10 bytes. That is, 8 M-cycles in Normal
// Speed Mode [1], and 16 “fast” M-cycles in Double Speed Mode [2].
// Older MBC controllers (like MBC1-3) and slower ROMs are not guaranteed
// to support General Purpose or HBlank DMA, that’s because there are
// always 2 bytes transferred per microsecond (even if the itself
// program runs it Normal Speed Mode).
//
// we should also respect General-Purpose DMA vs HBlank DMA
if self.dma.active_hdma() {
// runs a series of pre-validation on the HDMA transfer in
// pedantic mode is currently active (performance hit)
assert_pedantic_gb!(
(0x0000..=0x7ff0).contains(&self.dma.source())
|| (0xa000..=0xdff0).contains(&self.dma.source()),
"Invalid HDMA source start memory address 0x{:04x}",
self.dma.source()
);
assert_pedantic_gb!(
(0x8000..=0x9ff0).contains(&self.dma.destination()),
"Invalid HDMA destination start memory address 0x{:04x}",
self.dma.destination()
);
// only runs the DMA transfer if the system is in CGB mode
// this avoids issues when writing to DMG unmapped registers
// that would otherwise cause the system to crash
if self.mode == GameBoyMode::Cgb {
let data = self.read_many(self.dma.source(), self.dma.pending());
self.write_many(self.dma.destination(), &data);
}
self.dma.set_pending(0);
self.dma.set_active_hdma(false);
}
}
pub fn read(&self, addr: u16) -> u8 {
match addr {
// 0x0000-0x0FFF - BOOT (256 B) + ROM0 (4 KB/16 KB)
0x0000..=0x0fff => {
// in case the boot mode is active and the
// address is withing boot memory reads from it
if self.boot_active && addr <= 0x00ff {
return self.boot[addr as usize];
}
if self.boot_active
&& self.mode == GameBoyMode::Cgb
&& (0x0200..=0x08ff).contains(&addr)
{
return self.boot[addr as usize]; }
self.rom.read(addr)
}
// 0x1000-0x3FFF - ROM 0 (12 KB/16 KB)
// 0x4000-0x7FFF - ROM 1 (Banked) (16 KB)
0x1000..=0x7fff => self.rom.read(addr),
// 0x8000-0x9FFF - Graphics: VRAM (8 KB)
0x8000..=0x9fff => self.ppu.read(addr),
// 0xA000-0xBFFF - External RAM (8 KB)
0xa000..=0xbfff => self.rom.read(addr),
// 0xC000-0xCFFF - Working RAM 0 (4 KB)
0xc000..=0xcfff => self.ram[(addr & 0x0fff) as usize],
// 0xD000..=0xDFFF - Working RAM 1 (Banked) (4KB)
0xd000..=0xdfff => self.ram[(self.ram_offset + (addr & 0x0fff)) as usize],
// 0xE000..=0xFDFF - Working RAM Shadow
0xe000..=0xfdff => self.ram[(addr & 0x1fff) as usize],
// 0xFE00-0xFE9F - Object attribute memory (OAM)
0xfe00..=0xfe9f => self.ppu.read(addr),
// 0xFEA0-0xFEFF - Not Usable
0xfea0..=0xfeff => 0xff,
// 0xFF00 - Joypad input
0xff00 => self.pad.read(addr),
// 0xFF01-0xFF02 - Serial data transfer
0xff01..=0xff02 => self.serial.read(addr),
// 0xFF04-0xFF07 - Timer and divider
0xff04..=0xff07 => self.timer.read(addr),
// 0xFF0F — IF: Interrupt flag
0xff0f =>
{
#[allow(clippy::bool_to_int_with_if)]
(if self.ppu.int_vblank() { 0x01 } else { 0x00 }
| if self.ppu.int_stat() { 0x02 } else { 0x00 }
| if self.timer.int_tima() { 0x04 } else { 0x00 }
| if self.serial.int_serial() { 0x08 } else { 0x00 }
| if self.pad.int_pad() { 0x10 } else { 0x00 }
| 0xe0)
}
// 0xFF10-0xFF26 — Audio
// 0xFF10-0xFF26 — Wave pattern
0xff10..=0xff26 | 0xff30..=0xff3f => self.apu.read(addr),
// 0xFF40-0xFF45 - PPU registers
// 0xFF47-0xFF4B - PPU registers
0xff40..=0xff45 | 0xff47..=0xff4b => self.ppu.read(addr),
// 0xFF46 — DMA: OAM DMA source address & start
0xff46 => self.dma.read(addr),
// 0xFF4C - KEY0: Compatibility flag (CGB only)
0xff4c => self.key0,
// 0xFF4D - KEY1: Speed switching (CGB only)
0xff4d => (if self.switching { 0x01 } else { 0x00 }) | ((self.speed as u8) << 7) | 0x7e,
// 0xFF4F - VRAM Bank Select (CGB only)
0xff4f => self.ppu.read(addr),
// 0xFF50 - Boot active flag
0xff50 => u8::from(!self.boot_active),
// 0xFF51-0xFF55 - VRAM DMA (HDMA) (CGB only)
0xff51..=0xff55 => self.dma.read(addr),
// 0xFF56 - RP: Infrared communications port (CGB only)
0xff56 => 0xff,
// 0xFF68-0xFF6B - BG / OBJ Palettes (CGB only)
0xff68..=0xff6b => self.ppu.read(addr),
// 0xFF70 - SVBK: WRAM bank (CGB only)
0xff70 => (self.ram_bank & 0x07) | 0xf8,
// 0xFF80-0xFFFE - High RAM (HRAM)
0xff80..=0xfffe => self.ppu.read(addr),
// 0xFFFF — IE: Interrupt enable
0xffff => self.ie,
addr => {
warnln!("Reading from unknown location 0x{:04x}", addr);
#[allow(unreachable_code)]
0xff
}
}
}
pub fn write(&mut self, addr: u16, value: u8) {
match addr {
// 0x0000-0x0FFF - BOOT (256 B) + ROM0 (4 KB/16 KB)
// 0x1000-0x3FFF - ROM 0 (12 KB/16 KB)
// 0x4000-0x7FFF - ROM 1 (Banked) (16 KB)
0x0000..=0x7fff => self.rom.write(addr, value),
// 0x8000-0x9FFF - Graphics: VRAM (8 KB)
0x8000..=0x9fff => self.ppu.write(addr, value),
// 0xA000-0xBFFF - External RAM (8 KB)
0xa000..=0xbfff => self.rom.write(addr, value),
// 0xC000-0xCFFF - Working RAM 0 (4 KB)
0xc000..=0xcfff => self.ram[(addr & 0x0fff) as usize] = value,
// 0xD000..=0xDFFF - Working RAM 1 (Banked) (4KB)
0xd000..=0xdfff => self.ram[(self.ram_offset + (addr & 0x0fff)) as usize] = value,
// 0xE000..=0xFDFF - Working RAM Shadow
0xe000..=0xfdff => self.ram[(addr & 0x1fff) as usize] = value,
// 0xFE00-0xFE9F - Object attribute memory (OAM)
0xfe00..=0xfe9f => self.ppu.write(addr, value),
// 0xFEA0-0xFEFF - Not Usable
0xfea0..=0xfeff => {}
// 0xFF00 - Joypad input
0xff00 => self.pad.write(addr, value),
// 0xFF01-0xFF02 - Serial data transfer
0xff01..=0xff02 => self.serial.write(addr, value),
// 0xFF04-0xFF07 - Timer and divider
0xff04..=0xff07 => self.timer.write(addr, value),
// 0xFF0F — IF: Interrupt flag
0xff0f => {
self.ppu.set_int_vblank(value & 0x01 == 0x01);
self.ppu.set_int_stat(value & 0x02 == 0x02); self.timer.set_int_tima(value & 0x04 == 0x04);
self.serial.set_int_serial(value & 0x08 == 0x08);
self.pad.set_int_pad(value & 0x10 == 0x10);
}
// 0xFF10-0xFF26 — Audio
// 0xFF10-0xFF26 — Wave pattern
0xff10..=0xff26 | 0xff30..=0xff3f => self.apu.write(addr, value),
// 0xFF40-0xFF45 - PPU registers
// 0xFF47-0xFF4B - PPU registers
0xff40..=0xff45 | 0xff47..=0xff4b => self.ppu.write(addr, value),
// 0xFF46 — DMA: OAM DMA source address & start
0xff46 => self.dma.write(addr, value),
// 0xFF4C - KEY0: Compatibility flag (CGB only)
0xff4c => {
self.key0 = value;
if value == 0x04 {
self.ppu().set_dmg_compat(true);
}
}
// 0xFF4D - KEY1: Speed switching (CGB only)
0xff4d => self.switching = value & 0x01 == 0x01,
// 0xFF4F - VRAM Bank Select (CGB only)
0xff4f => self.ppu.write(addr, value),
// 0xFF50 - Boot active flag
0xff50 => self.boot_active = value == 0x00,
// 0xFF51-0xFF55 - VRAM DMA (HDMA) (CGB only)
0xff51..=0xff55 => self.dma.write(addr, value),
// 0xFF56 - RP: Infrared communications port (CGB only)
0xff56 => {}
// 0xFF68-0xFF6B - BG / OBJ Palettes (CGB only)
0xff68..=0xff6b => self.ppu.write(addr, value),
// 0xFF70 - SVBK: WRAM bank (CGB only)
0xff70 => {
let mut ram_bank = value & 0x07;
if ram_bank == 0x0 {
ram_bank = 0x1;
}
self.ram_bank = ram_bank;
self.ram_offset = self.ram_bank as u16 * 0x1000;
}
// 0xFF80-0xFFFE - High RAM (HRAM)
0xff80..=0xfffe => self.ppu.write(addr, value),
// 0xFFFF — IE: Interrupt enable
0xffff => self.ie = value,
addr => warnln!("Writing to unknown location 0x{:04x}", addr),
}
}
/// Reads a byte from a certain memory address, without the typical
/// Game Boy verifications, allowing deep read of values.
pub fn read_raw(&mut self, addr: u16) -> u8 {
match addr {
0xff10..=0xff3f => self.apu.read_raw(addr),
_ => self.read(addr),
}
}
/// Writes a byte to a certain memory address without the typical
/// Game Boy verification process. This allows for faster memory
/// access in registers and other memory areas that are typically
/// inaccessible.
pub fn write_raw(&mut self, addr: u16, value: u8) {
match addr {
0xff10..=0xff3f => self.apu.write_raw(addr, value),
_ => self.write(addr, value),
}
}
pub fn read_many(&mut self, addr: u16, count: u16) -> Vec<u8> {
let mut data: Vec<u8> = vec![];
for index in 0..count {
let byte = self.read(addr + index);
data.push(byte);
}
data
}
pub fn write_many(&mut self, addr: u16, data: &[u8]) {
for (index, byte) in data.iter().enumerate() {
self.write(addr + index as u16, *byte)
}
}
pub fn read_many_unsafe(&mut self, addr: u16, count: u16) -> Vec<u8> {
let mut data: Vec<u8> = vec![];
for index in 0..count {
let byte = self.read_raw(addr + index);
data.push(byte);
}
data
}
pub fn write_many_unsafe(&mut self, addr: u16, data: &[u8]) {
for (index, byte) in data.iter().enumerate() {
self.write_raw(addr + index as u16, *byte)
}
}
pub fn write_boot(&mut self, addr: u16, buffer: &[u8]) {
self.boot[addr as usize..addr as usize + buffer.len()].clone_from_slice(buffer);
}
pub fn write_ram(&mut self, addr: u16, buffer: &[u8]) {
self.ram[addr as usize..addr as usize + buffer.len()].clone_from_slice(buffer);
}
pub fn ram(&mut self) -> &mut Vec<u8> {
&mut self.ram
}
pub fn ram_i(&self) -> &Vec<u8> {
&self.ram
}
pub fn set_ram(&mut self, value: Vec<u8>) {
self.ram = value;
}
pub fn rom(&mut self) -> &mut Cartridge {
&mut self.rom
}
pub fn rom_i(&self) -> &Cartridge {
&self.rom
}
pub fn set_rom(&mut self, rom: Cartridge) {
self.rom = rom;
}
pub fn mode(&self) -> GameBoyMode {
self.mode
}
pub fn set_mode(&mut self, value: GameBoyMode) {
self.mode = value;
}
pub fn set_gbc(&mut self, value: SharedThread<GameBoyConfig>) {
self.gbc = value;
}
}
impl Default for Mmu {
fn default() -> Self {
let mode = GameBoyMode::Dmg;
let gbc = SharedThread::new(Mutex::new(GameBoyConfig::default()));
let components = Components {
ppu: Ppu::new(mode, gbc.clone()),
apu: Apu::default(),
dma: Dma::default(),
pad: Pad::default(),
timer: Timer::default(),
serial: Serial::default(),
};
Mmu::new(components, mode, gbc)
}
}